Orcad 16.6 Tutorial · Full & Limited

Click on the icon (shortcut: P ) on the right-hand toolbar.

: Using the Package Symbol Wizard , he defined a 9-pin header with a 0.1-inch lead pitch, setting Pin 1 as a square pad for easy identification.

The DRC finds floating pins, short circuits, and duplicate designators.

Choose a dedicated location folder. Always keep your project files in a single, organized directory. orcad 16.6 tutorial

Go to to configure your layer stackup (e.g., a standard 4-layer board with Top, GND, Power, and Bottom layers).

spreadsheet and enter the exact name of the PCB footprint (e.g., ) in the "PCB Footprint" field. 2. PCB Footprint Creation (Padstack & Symbol Editor)

is a foundational electronic design automation (EDA) software suite from Cadence that combines several powerful modules: Capture for schematic entry, PSpice for circuit simulation, and PCB Editor for board layout and routing. While newer versions exist, 16.6 remains widely used in academic settings and industry due to its reliability and extensive support resources. This tutorial will guide you through the entire design flow from installation, schematic capture, simulation, to PCB layout in OrCAD 16.6. Click on the icon (shortcut: P ) on the right-hand toolbar

Differential pairs (e.g., for USB, HDMI, Ethernet) require matched lengths and controlled impedance.

Tools > Design Rules Check . Ensure there are 0 errors. Generate Gerber Files: Go to Manufacture > Artwork . Generate Drill Files: Go to Manufacture > NC > NC Drill .

OrCAD 16.6 is a powerful electronic design automation (EDA) software used for designing, simulating, and laying out printed circuit boards (PCBs). This tutorial will guide you through the basics of using OrCAD 16.6 to design a simple PCB. Choose a dedicated location folder

Select your root project folder in the OrCAD Capture directory tree. Go to .

Click on the pin of a component, move the mouse to another pin, and click again to connect. C. Adding Power and Ground Click (shortcut: 'F') for VCC/+5V. Click Place > Ground (shortcut: 'G') for GND. D. Annotating and Checking

: In OrCAD PCB Editor , you can use the Package Symbol Wizard to quickly generate footprints for standard parts like headers or ICs by entering dimensions from a datasheet.

Enter the exact name of the Allegro footprint library part (e.g., RES_REXT_AXIAL_0.4 or SOIC8 ).