Invt Che100 Inverter User Manualpdf |top| -

To get your INVT CHE100 running quickly for basic applications, configure the following core parameters. Ensure your motor's nameplate data matches the drive settings before starting. Group P0: Core Function Parameters 0 : Keypad control (RUN/STOP keys) 1 : Terminal control (External switches) 2 : Communication control (Modbus RTU via RS485)

The CHE100 is capable of sophisticated control tasks. The manual details these advanced functions in their respective parameter groups.

: Built-in braking unit for models from 0.4kW up to 11kW .

You have not tuned the motor parameters. Perform dynamic parameter auto-tuning: Set P0.01 to 0 (keypad control), P1.00 to 2 (for vector control), then set P1.16 to 1 and press RUN. The inverter will measure motor resistance and inductance automatically. Invt CHE100 Inverter User Manualpdf

Check the mechanical load for binding. Verify that the motor thermal protection parameter settings match the actual motor nameplate. Consider upgrading to a larger VFD model if the application demands higher continuous current. OH1 / OH2: Inverter Overheat

According to the ⁠CHE100 Inverter User Manual PDF , key specifications include:

Single-phase 220V, Three-phase 220V, Three-phase 380V. Output Frequency: 0.00 to 400.00Hz. Overload Capacity: 150% rated current for 60 seconds. Starting Torque: 150% of rated torque at 0.5Hz. 🛠️ Wiring and Installation Steps To get your INVT CHE100 running quickly for

| Group | Description | |---|---| | | Basic functions (control mode, command source, frequency source, acceleration/deceleration time) | | P1 Group | Start/stop control (starting frequency, DC braking, stop mode) | | P2 Group | Motor parameters (rated power, rated current, rated speed) | | P3 Group | Speed and torque regulation parameters (proportional gain, integral time) | | P4 Group | V/F control parameters | | P5 Group | Digital and analog input terminal functions | | P6 Group | Output terminal functions (relay, analog output) | | P7 Group | Display interface and password protection | | PC Group | Communication parameters (RS485 baud rate, parity, address) | | PD Group | Supplementary functions (oscillation suppression, torque control, etc.) |

: Environmental requirements and mounting procedures.

The INVT CHE100 series is a general-purpose frequency inverter that leverages a high-performance DSP (Digital Signal Processor) control system. Its core strength lies in offering two primary control modes: and V/F (Voltage/Frequency) Control . This dual-mode capability makes it suitable for everything from demanding applications requiring high torque at low speeds, such as machine tools and wire-drawing machines, to simpler uses like pumps and fans. The manual details these advanced functions in their

Robust design capable of handling high momentary loads.

The inverter must be securely grounded to prevent electric shock and reduce electromagnetic interference (EMI).

The is essential because it contains the exact wiring diagrams, function code tables, and fault diagnosis flowcharts tailored to your specific power rating.

| Model | Capacity (kW) | Current (A) | Dimensions (W x H x D in mm) | |---|---|---|---| | CHE100-0R7G-2 | 0.75 | 4.5 | 85 x 140 x 115 | | CHE100-1R5G-2 | 1.5 | 7.0 | 120 x 180 x 140 | | CHE100-2R2G-2 | 2.2 | 10.0 | 120 x 180 x 140 | | CHE100-004G-2 | 4.0 | 16.0 | 160 x 250 x 175 | | CHE100-5R5G-2 | 5.5 | 21.0 | 160 x 250 x 175 |

The INVT CHE100 is a versatile, high-performance sensorless vector control inverter widely used in industrial automation. Whether you are installing a new unit or troubleshooting an existing system, having a comprehensive understanding of the user manual is essential.