The Adjustment Program is a proprietary service utility developed by Epson for technicians. It communicates directly with the printer's firmware to perform maintenance tasks, run diagnostics, and reset internal memory logs.
Delete all pending print jobs from your Windows print spooler.
This specific digital error code appears during a print job, indicating a maintenance lockdown.
Keep the box checked, then click the Initialization button. adjustment program epson l3060
The most common use. The printer tracks how much ink has been flushed into its internal waste ink pads. Once this counter hits a limit (usually around 7000-10000 pages), the printer stops and shows a "Service Required" error (e.g., "Parts inside your printer are at the end of their service life"). The Adjustment Program resets this counter.
Locate and click on Waste ink pad counter under the maintenance section, then click "OK."
The (often called AdjProg or an Epson Resetter) is a third‑party maintenance utility designed specifically for the Epson EcoTank L3060 all‑in‑one printer. Its primary purpose is to reset the printer’s internal waste ink counter, clear the “Service Required” error, and restore normal printing operation. The program is not an official Epson release; it is made available by independent technicians and enthusiast communities. The Adjustment Program is a proprietary service utility
Which (Windows version) are you using to connect to the printer?
The is a specialized maintenance utility used to reset the internal "waste ink pad counter". When this counter reaches its limit, the printer stops working and displays a "service required" error, often accompanied by flashing red lights. 🛠️ How the Resetter Works
The software will request that you turn off the printer. Turn it off, then on again, and the error should be cleared. Critical Considerations This specific digital error code appears during a
The Adjustment Program for Epson printers (including the L3060) is a third‑party utility used to reset internal counters and perform service maintenance tasks — for example, resetting the waste ink pad counter, initializing certain service flags, or running maintenance routines not exposed in the regular printer driver/software.
Click Select and ensure the model is set to L3060 . Choose the USB port corresponding to your printer. Access Utility: Click on Particular adjustment mode . Reset Counter: Select Waste ink pad counter , then click OK.
Make sure you extracted the files entirely out of the ZIP archive before running the application. Always run the program with full administrator privileges.