Api 610 12th Edition Data Sheet Excel Updated

: Allows for built-in calculations for differential head and motor sizing based on input parameters. Data Integration

Specifies OH2, VS6, BB2, etc. (API 610 defines 18 configurations). Section 2: Technical Specifications and Material Class

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: For pumps with discharge nozzles larger than 3 inches operating in parallel, the data sheet must reflect head values within 3% of each other in the preferred operating region. Amarinth Pumps UK Availability and Access

: Updated classes (e.g., removing I-1 and I-2 cast iron groups) and specific material designations like for duplex pressure castings. Testing and Inspection Api 610 12th Edition Data Sheet Excel

Best Practices for Designing an API 610 12th Edition Excel Data Sheet

❌ if:

The data sheet requirements have expanded to capture more precise operational data: Operating Points

: For vertical pumps (VS4 and vertical in-line), the NPSH3 reference point has shifted to the impeller suction eye to maintain consistency with horizontal pumps. Technical Sections in the Data Sheet : Allows for built-in calculations for differential head

Your datasheet asks for normal flow, rated flow, and minimum flow . If you leave minimum flow blank, the vendor assumes you will never run the pump below 30% of BEP. If your plant turndown goes to 15%, you will experience recirculation and seal failure. Always state your required operating range.

NPSH Margin Check: If (NPSHA−NPSHR)

Radiography, magnetic particle, dye penetrant, or ultrasonic testing requirements for pressure-retaining parts.

Drain rim or drain pan type, grout hole provisions, and lifting lug locations. Inspection, Testing, & Documentation Section 2: Technical Specifications and Material Class This

: Shaft guards are now mandatory for all pump types to enhance operator safety.

This section establishes the foundational process parameters.

: Beyond just rated and normal points, the data sheet now allows for three additional operating points