Xmtk-9000 User Manual -
Connect a certified signal generator to the analog input terminals. Inject a precise 4.00mA reference signal.
The menu structure is optimized for straightforward accessibility:
Once powered on, the XMTK-9000 boots into the initialization wizard within 15 seconds. Follow these steps to complete the base system provisioning. Network Configuration The default factory network configurations are as follows: 192.168.1.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1
The controller will flash an output indicator, and the PV will fluctuate while tuning. Do not turn off power until the tuning is complete. 5. Troubleshooting Common Issues
Press and hold the front-panel hardware reset pinhole with a paperclip while switching the main power supply back on. xmtk-9000 user manual
Which you are using (Modbus, EtherNet/IP, etc.)? What sensors or hardware are you wiring to the inputs? Are you encountering a specific error code ?
Adjusts the signal dampening factor (range 1 to 20). Higher values reduce signal noise but introduce response lag. Operating Modes Automatic Mode (Default)
Factory calibration is performed using traceable standards. However, for critical applications, annual calibration is advised.
| Parameter | Specification | |-----------|---------------| | | 0–400°C (depending on sensor) | | Accuracy | ±0.5% FS ± 1 digit | | Display | 3½ digit 0.5-inch (or 0.8-inch) LED | | Input Types | Thermocouple (K, E, J, S, B, R, N, T), RTD (Pt100, JPt100), voltage (0–5V, 1–5V), current (0–10mA, 4–20mA) | | Sampling Cycle | 0.5 seconds | | Control Output | Relay 250VAC 5A, SSR driver 0–12V, current 0–10mA/4–20mA, voltage 0–5V/1–5V | | Alarm Output | Up to 2 groups, 12 modes, 250VAC 3A | | Power Supply | 220VAC ±10%, 50Hz | | Power Consumption | <10VA | | Panel Cutout | 45×45mm (common for 48×48mm housing) | | Operating Environment | 0–50°C, 35–85%RH, non-corrosive, non-condensing | | Weight | Approx. 0.2–0.5kg | Connect a certified signal generator to the analog
Upon turning on the power switch, the XMTK-9000 initializes a self-test protocol. The front panel LEDs will flash, and the LCD screen will display the current firmware version before entering the primary operational dashboard. Accessing the Parameter Menu
The XMTK-9000 is a high-performance, industrial-grade control module engineered for precision automation, real-time data processing, and seamless system integration. Package Checklist
. The "AT" indicator will light up while the controller calculates the optimal PID values for your specific application. CNC Electric 3. Installation & Safety
The XMTK-9000 ships with a default static IP address configured from the factory. Follow these steps to complete the base system provisioning
The XMTK-9000 operates across three primary user modes designed to segregate day-to-day operation from system modification. Mode Structure
Configures the maximum engineering value displayed at peak input signal.
Provide the error log (via USB export) and a detailed description of the fault.