For native versions of the 2020.23 software, follow these general steps: : Start the setup and accept the terms. Enter Password : If prompted, enter ThankYou and proceed.
: Tick the box to create a desktop shortcut and press Next .
To prevent the software from attempting to validate its license with official Autocom servers, disconnect your PC from Wi-Fi or unplug your Ethernet cable during installation. 🛠️ Step-by-Step Autocom 2020.23 Installation Guide
: If you haven't already, download Autocom 2020.23 from the official website or an authorized distributor. Ensure you have the installation files and any accompanying documentation.
: If your diagnostic hardware (VCI) isn't communicating with the car, try turning off the Windows Firewall or checking your Bluetooth hardware settings within the software. autocom 2020.23 installation password
: Windows 7, 8, 10, or 11 (64-bit is highly recommended for stability).
The official Autocom software, installed with a genuine license and hardware, . The proper installation process is significantly different:
Depending on where you obtained your software package, you will activate it using one of two methods:
The information regarding the "installation password" is for educational purposes regarding software installation. Autocom diagnostic software is a commercial product protected by copyright and licensing laws. Using a password to install the software obtained from unofficial sources, as described in many forum posts, likely violates the software's End User License Agreement (EULA) and constitutes software piracy. For native versions of the 2020
Follow these steps carefully to ensure the software installs correctly.
Which (Windows 10, 11, etc.) are you using? Share public link
Before extracting the files, you must prepare your computer system to prevent installation errors.
Change your Windows system date to before running the setup. To prevent the software from attempting to validate
This version requires manual file activation since it does not use a standard serial key. Step 1: Generate the Activation File Launch the installed Autocom software from your desktop.
If a yellow exclamation mark appears, manually update the driver pointing to the Driver folder located inside your Autocom installation directory.
Click "Finish" to complete the initial installation. 3. Activation Process (FileActivation.xml)
For the majority of Autocom diagnostic units, the standard Bluetooth pairing PIN is: Crucial Troubleshooting and Tips
Most modern versions of the 2020.23 installer do not require a password to run the setup, but they do require a FileActivation process. Step-by-Step Installation Guide
The primary installation password for is generally ThankYou . This password is required during the initial phase of the setup to unlock the installer files. Installation & Activation Guide