How Do I Reset My Parrot Mki9200 Without Remote -

Whether you are suffering from a "Memory Full" error, trying to clear a previous owner's data, or troubleshooting a frozen screen, this guide covers every available alternative method to reset your Bluetooth module. Method 1: The Virtual Steering Wheel Menu Reset

The Parrot screen will display a message saying or "Remote Paired."

To perform a reset without the remote, you must be able to access the Parrot menu through another method, such as a or by using the physical center button on the display (if available).

The screen is frozen or the voice prompts are not responding.

: Turn your vehicle’s key to the accessory or ignition position. how do i reset my parrot mki9200 without remote

Once the menu appears on the MKi9200 screen, use the Track Forward button to scroll until you see "Settings".

If the unit is frozen or you just need to reboot it, you can perform a "soft reset" by cutting power.

However, you can perform a hardware (factory) reset . This will erase all paired phones, the phonebook, and custom settings, returning the unit to its out-of-the-box state.

Take your paperclip or pin, insert it straight into the reset hole, and press firmly until you feel a tactile click (like pressing a tiny button inside). Hold it down for approximately 10–15 seconds. Whether you are suffering from a "Memory Full"

: If the unit "forgets" settings every time you turn the car off, the red (permanent 12V) and orange (ignition) wires may need to be swapped. JustAnswer 3. Firmware Update

Before attempting any of these procedures, back up any important data from connected devices, as the reset process is irreversible. Once you have completed the reset, enjoy your freshly restored Parrot MKi9200 and its improved performance.

Consult a car audio professional to ensure the power connections are correct.

No. It clears Bluetooth pairings and temporary cache. The equalizer settings, language, and voice tags will likely remain. To fully wipe those, you need the remote. : Turn your vehicle’s key to the accessory

: Remove the car's ignition key or disconnect the Parrot control unit's power harness for at least one hour before reconnecting. JustAnswer Troubleshooting "Memory Full"

How to reset a Parrot MKi9200 without the remote - JustCarKits

: Press the Phone/Accept Call button to enter the menu.

Scroll down to (or "Restore Factory Settings") and press the Phone button to confirm the action.