Choose as the file system and click start. Note: This will erase all data on the drive.
The EVPAD cannot read cards partitioned as exFAT or NTFS. Reformat your card specifically to FAT32 on your computer. To help debug any issues you are facing, please tell me:
Most EVPAD devices are designed to update "Over-the-Air" (OTA) automatically.
Another common method, especially for AMLogic-based devices, uses the : evpad 5s firmware install download
Download the compressed firmware archive (usually in a .zip or .img format).
To install or update firmware on your , you can use the built-in update tool or access specific download centers for older models. Method 1: Automatic OTA Update (Recommended)
Wait for the upgrade progress bar to complete before removing the card and restarting. 4. Troubleshooting: Factory Reset Choose as the file system and click start
The standard flashing utilities used for Allwinner/EVPAD processors.
Select and confirm. This clears conflicting old data. Select Wipe cache partition and confirm. Navigate to Apply update from EXT or Apply update from USB .
: Navigate to the Settings logo on your homepage. Reformat your card specifically to FAT32 on your computer
Use a PC to "burn" the downloaded firmware onto an SD card using a tool like the PhoenixCard burning program Power off the and insert the prepared SD card.
If the file is named something complex, rename it to update.zip if required by your specific firmware instructions. Safely eject the USB flash drive from your computer. Step 3: Install Firmware via Recovery Mode (Hard Reset)
Re-enter recovery mode and execute a complete factory data wipe.
Gently insert your paperclip into the AV jack until you feel a soft click. Hold it down firmly. Step 4: Install the Firmware
