Tailored to specific hardware versions operating across VHF (136–174 MHz) or UHF (400–470 MHz) blocks.
Calibrate Voice-Operated Transmission parameters for hands-free operations.
The programming utility unlocks system configurations not easily altered on the physical keypad layout:
This is a lightweight, dedicated utility designed specifically for this radio model. Weierwei Vev-3288s Programming Software
Turn the radio on and set the volume knob to roughly 60-70%.
often supports radios with similar chipsets (like the Puxing PX-777), though official manufacturer software is recommended for full feature compatibility. Connection Requirements To use the software, you need the following hardware: Programming Cable:
To program the device, you need a compatible hardware setup and the correct software version: : A standard 2-pin USB programming cable Tailored to specific hardware versions operating across VHF
Open the VEV-3288S software and select the correct COM port from the "Setup" or "Communication" menu. Read from Radio:
Enter the transmitting frequency. For simplex operations, this will match the RX frequency. For repeaters, input the designated offset frequency.
: The factory software typically includes both English and Chinese language options. Turn the radio on and set the volume knob to roughly 60-70%
Ensure your radio battery is fully charged. Low voltage can cause data corruption or communication drops mid-transfer. CHIRP Support Alternative
⚠️ The Vev-3288s is not a Baofeng UV-5R clone. Do not use BF-480 or Kenwood software.
The Vev-3288s is a Part 90 compliant commercial radio. While you can change channels manually (VFO mode), doing so for 128 channels is tedious. More importantly, features like:
To get your radio to break squelch with another radio, both QT/DQT Dec and Enc must match the other radio’s tone/code.