STOPzilla is being discontinued and is no longer available for purchase. Please review SUPERAntiSpyware if you are looking for a best-in-class AntiVirus.
We have more details below.
All users will receive a new subscription key to SUPERAntiSpyware PRO Lookout for an email from support@mail.iolo.com with download and setup instructions.
Standard range of 2.0 meters to 3.5 meters (6.5 feet to 11.5 feet)
Press and hold the for 2 seconds (or cycle the power). The LED indicator will flash rapidly in red and green. Step outside the detection zone completely.
: Feed the multi-core connection cable through the rubber grommet on the rear panel. Strip back the wire jackets according to the system terminal block allocations.
Change this parameter if two sensors are mounted close together to prevent mutual interference. Safety Curtain Rows prosecure opti combi manual english
Settings can be adjusted using the onboard red and black buttons or via a remote control.
The Opti-Combi integrates several functions into a single unit:
The infrared curtain must protect the threshold area immediately in front of the moving door leaf. Standard range of 2
Swap the internal radar lens. The standard lens creates a wide pattern, while turning the lens 90 degrees or swapping to a narrow lens focuses the field directly on narrow corridors. Infrared Safety Field Adjustments
The ProSecure Opti Combi is a high-performance, dual-technology sensor designed to optimize the safety and efficiency of automatic sliding doors. By combining microwave radar for motion detection and active infrared (AIR) for presence detection, this sensor ensures compliant, reliable door activation and pedestrian protection.
The includes a rarely-read but vital maintenance schedule. To avoid lock failure, adhere to this checklist: : Feed the multi-core connection cable through the
Before beginning the installation, verify that your sensor package is complete and matches the electrical requirements of your automatic door controller. Box Contents 1 x ProSecure Opti Combi Sensor Unit 1 x Main Connection Cable (typically 3 meters) 1 x Mounting Template (adhesive paper) 2 x Mounting Screws 1 x English Quick Start Guide Technical Data 12–24 V AC ±10% / 12–30 V DC ±10% Power Consumption: < 4 W (VA)
The ProSecure Opti Combi is an EN 16005-compliant sensor for automatic sliding doors that combines microwave radar for motion detection and active infrared (AIR) for safety. The device requires specific mounting and wiring configurations for optimal functionality, featuring adjustments for inclination angle and presence zone coverage. For the official English manual, download the Opti Combi Quick Guide from dormakaba . prosecure opti combi
The terminal assignments for the output signals vary depending on the specific door operator model being used. The manual provides detailed tables for various dormakaba operators, including the series.
