(Replace 192.168.1.100 with your target server’s actual IP address.)
Set it manually (must match any ACL you create):
Link the backstore to the target:
: Obtain the iSCSI Cake V1.8 installer and run it on a Windows-based server (compatible with Windows 2000 through 2008/Vista).
Upon rebooting, the client machine's network card will broadcast a PXE request. The iSCSI Cake server will respond, assign an IP address via DHCP, attach the Win10_Master virtual disk, and boot into Windows over the network interface. Troubleshooting and Optimization Tips iscsi cake 18 install
Now, you will create the virtual disk that your clients will connect to and use as a local hard drive.
This is built into modern Windows (accessible via iscsicpl from the command prompt).
Protects server data by redirecting client write requests to a temporary working directory.
With the server running, you can now mount the disk on a client machine. Open the on the client computer. Search for and open iSCSI Initiator . Go to the Discovery tab and click Discover Portal . (Replace 192
The iSCSI target communicates over . You must allow this traffic.
Right-click the Windows Start menu on the client and select .
cake-cli create-target ://2026-06.com.example:storage.cake18 Use code with caution. Step 3: Create LUN Map the backstore to the target.
A managed or unmanaged Gigabit Ethernet switch. Avoid 100 Mbps switches, as they cause severe performance bottlenecks during client boot times. Troubleshooting and Optimization Tips Now, you will create
Assign the virtual boot disk you created in Step 4.2 to this user profile. Click . 5. Client-Side Connection and Initiator Setup
Here’s a useful, concise report on — interpreting “Cake 18” as a typo or shorthand for Ceph 18 (specifically Ceph Reef, v18.2.x) with iSCSI gateway configuration.
If restricting access via initiator names, input the precise IQN string of the client machine.
Add an explicit inbound rule for TCP port 3260 on the server firewall. Verify ping response from client to server.
: Verify the server's IP address is static so clients don't lose the connection. Formacionpoliticaisc 3. Client-Side (Initiator) Setup