Asus H81m-k Motherboard Setup [verified] Info

: Intel Graphics Accelerator (if not using a dedicated GPU).

1 x PCIe x16 slot for graphics cards and 2 x PCIe 2.0 x1 slots.

Ensure the brass standoffs inside the case line up with the mounting holes on the Micro-ATX board.

Plug the 4-pin ATX 12V cable into the CPU power connector near the socket. 5. Storage and Front Panel Wires asus h81m-k motherboard setup

If using a dedicated GPU, insert it into the yellow .

Verify that your monitor is plugged into the dedicated graphics card rather than the motherboard ports (if a discrete GPU is installed). Try testing with only one stick of RAM in the primary slot.

Align the notch on the bottom of the RAM stick with the break in the slot. : Intel Graphics Accelerator (if not using a dedicated GPU)

The ASUS H81M-K features an intuitive dashboard alongside an Advanced Mode (accessible by pressing F7 ).

Push down the plastic locks on the outer edges of the RAM slots.

If you're using a CPU cooler, install it according to the manufacturer's instructions. Make sure the cooler is securely fastened to the motherboard. Plug the 4-pin ATX 12V cable into the

Go to the tab. Under Boot Option Priorities , set your installation media (such as your USB flash drive containing Windows) as Boot Option #1 . Step 3: Enable XMP (Optional)

Press the key to enter the BIOS (usually F2, DEL, or ESC). The BIOS screen will display the motherboard's settings and configuration options.

The front panel header (labeled PANEL ) is in the bottom-right corner. Use the motherboard diagram (printed on the board itself) to connect:

Before touching any components, prepare your workspace to prevent static damage.

Apply a pea-sized drop of thermal paste directly to the center of the CPU integrated heat spreader. 3. Mounting the CPU Fan