2 x DDR2 or DDR3 DIMM slots (depending on the specific OEM revision).
If you are servicing a Foxconn board marked ML194V-0, look out for these common configuration issues:
1x PCI Express x16 (for graphics), 1-2x PCI Express x1. Storage: SATA II (3.0Gb/s) or SATA III (6.0Gb/s) ports. Form Factor: Micro-ATX. 2. Processor and Memory Support Processor Compatibility
Do not search for "ML194V-0 PDF" alone. Search for "HP Compaq dx2400 Motherboard Layout Guide" to find the exact jumper and header settings. FOXCONN ML194V-0 MOTHERBOARD MANUAL
** FOXCONN ML194V-0 MOTHERBOARD MANUAL SPECIFICATIONS **
Go to Acer's support website, search for "Aspire M3802," and download all drivers listed for Windows 7 64-bit. They are 100% compatible with the ML194V-0.
1 x Ultra ATA connector (available on older revisions only). 2. Motherboard Layout and Component Map 2 x DDR2 or DDR3 DIMM slots (depending
Based on common versions of this board found in OEM systems:
The front panel audio header allows you to use the headphone and microphone jacks on your computer case. It follows the standard Intel HD Audio pinout: MIC L (Microphone Left Channel) Pin 2: GND (Ground) Pin 3: MIC R (Microphone Right Channel) Pin 4: PRESENCE# (Active low signal) Pin 5: LINE 2R (Headphone Right Channel) Pin 6: MIC_RET (Microphone Return) Pin 7: SENSE_SEND (Jack Detection) Pin 9: LINE 2L (Headphone Left Channel) Pin 10: LINE_RET (Headphone Return) Internal USB Headers (F_USB)
Foxconn ML194V-0 Motherboard Guide: Specifications, Layout, and Troubleshooting Form Factor: Micro-ATX
The Foxconn ML194V-0 is typically a Micro-ATX or laptop-specific motherboard designed for mid-range systems of the early 2010s.
The BIOS is HP-branded and locked to only accept microcode-verified CPUs. Installing a non-HP-sourced or unsupported LGA1155 CPU may result in a .
A CR2032 coin-cell battery responsible for retaining BIOS settings and the system clock.
The FOXCONN ML194V-0 motherboard may encounter issues during installation, configuration, or operation. The following steps outline the troubleshooting process: