Ivoclar Programat P95 Manual < HD >

Connect the device to a grounded power source.

Used for inputting program parameters, temperatures, and times. START Key: Initiates the selected firing program.

Be careful not to damage the blade contacts (33).

The manual will provide specific guidelines on how to tailor these settings for different ceramic materials and firing techniques (e.g., wash firing, dentin firing, glaze firing), ensuring optimal aesthetics and physical properties.

Whether you have recently acquired a pre-owned unit, need to train a new lab technician, or are troubleshooting an existing machine, this comprehensive guide serves as an unofficial operational manual and reference standard for the Programat P95. 1. Technical Specifications and Design Overview Ivoclar Programat P95 Manual

If your vacuum isn't reaching the desired level, verify that the pump is clear of dust and the connection hoses are airtight. 4. Why the P95 Still Matters While newer models like the Programat EP 5000

Over time, thermocouples age and drift. The manual recommends checking calibration every six months using a pure silver wire calibration kit:

Place the furnace on a stable, flat, and heat-resistant surface.

) is typically auto-programmed to 1 minute, and closing time ( ) to 30 seconds, though these can be manually adjusted. Vacuum Settings ( Connect the device to a grounded power source

Check the vacuum hose for leaks and ensure the pump is clean.

, covering key aspects of operation, maintenance, and setup, based on the manufacturer’s instructions. 1. Overview of the Programat P95 Furnace Ivoclar Programat P95

The exact temperature where the vacuum pump activates.

: Slide the control unit (S) into the furnace base (61b) along the guides until the locking bolts engage with an audible click. Cooling Plate Be careful not to damage the blade contacts (33)

The temperature at which the vacuum releases and the pump shuts off. Step-by-Step Programming Guide

): The controlled, gradual opening or temperature drop phase to prevent thermal shock in the ceramic matrix. 4. Programming and Step-by-Step Operation

: Connect the vacuum pump to the designated socket and ensure it is placed in a ventilated space free of foreign matter. Ivodent Magyarország Operation Guide

Press or the parameter key again to store the value into memory. Repeat this process for all necessary parameters (

The duration the furnace maintains the maximum firing temperature (T).

The P95 is designed for simplicity. The front keypad allows users to enter parameters such as stand-by temperature, heating rate, and vacuum levels quickly. Key Operating Parameters Can be freely programmed between