Zk5kx Manual Official

: Never short the input and output connections, as this can permanently damage the constant current functionality. Helpful Resources

: Shows live telemetric data such as input/output voltage, current, and active system protection states. Basic Operational Workflows 1. Toggling the Display Parameters

You will be asked for:

The ZK-5KX operates on a buck-boost topology, meaning it can smoothly step up or step down the output voltage regardless of whether the input voltage fluctuates higher or lower than your target setpoint. 6.0V – 36.0V DC Output Voltage Range: 0.6V – 36.0V DC zk5kx manual

: Set to 0 (Output is Off by default upon power-up) or 1 (Output triggers On automatically when power is applied).

Secure the zk5kx module using the provided M3 mounting holes. Ensure the module is placed on a non-conductive surface to prevent short circuits on the underside of the PCB.

: Guards against short circuits and excessive draws (Configurable range: 0 to 5.1A). : Never short the input and output connections,

The ZK-5KX is a 5A, 80W buck-boost converter module featuring a wide 6.0V–36V input and 0.6V–36V output range, designed for DIY bench power supplies. It includes configurable protection mechanisms for over-voltage, over-current, over-power, and over-temperature, along with a rotary encoder for precise adjustments. For full manual details, refer to the documentation from eleneasy.com eleneasy.com zk-5kx_voltage-converter.pdf - eleneasy.com eleneasy.com zk-5kx_voltage-converter.pdf - eleneasy.com eleneasy.com

: Shuts down the output loop if the output voltage climbs above your safety limit.

The fan automatically turns on when the temperature exceeds 50°C or current exceeds 1A, preventing overheating. 5. Troubleshooting and FAQ 1. The screen is on, but there is no output? Toggling the Display Parameters You will be asked

The zk5kx front panel includes a multi-color LED. The manual decodes these signals:

Turn the rotary encoder left or right to increase or decrease the flashing value.

: Short-press to enter the target Output Voltage and Constant Current (CC) configuration menu. Long-press to open the advanced software protection and calibration submenus.