The easiest way is to plug the device in, open Device Manager , look for the device (it will likely appear under "Other devices" with a yellow triangle), right-click it, select Properties , go to the Details tab, and change the property to Hardware IDs .
Leo wasn’t born yesterday. He knew that “a few minutes” in Windows time was a black hole where hope went to die. But he couldn’t reboot. Not now. Not when the device in question was the last piece of his late grandfather’s legacy: a cheap, plastic EasyCAP USB dongle.
The USBTV007 (often manufactured by Fushicai or Somagic) serves as a bridge for legacy media. For enthusiasts digitizing VHS tapes or monitoring FPV (First Person View) drone feeds on a laptop, this driver is the only way for modern Windows kernels to communicate with the device's specific chipset. Without the correct 64-bit driver, the device typically appears as an "Unknown Device" or "SMI Grabber" with a yellow exclamation mark in the Device Manager. Installation on Windows 10 64-bit
Click . Select Show All Devices and click Next . Click the Have Disk... button. Usbtv007 Driver Windows 10 64 Bit
It is a name brand; rather, the driver identifier "usbtv007" is hardcoded into the device's firmware. When plugged into a Windows 10 64-bit PC without drivers, it will often appear in Device Manager as an "Unknown Device" with the hardware ID VID_05E1&PID_0408 or similar.
Once Windows boots, retry the installation steps in Section 3. 5. Recommended Capturing Software for 2026
Point the browser to the folder where you extracted your downloaded drivers (specifically the subfolder if available) and click Next. The easiest way is to plug the device
: A top free choice for recording and deinterlacing old analog signals.
The Usbtv007 refers to a specific chipset (typically the Empia EM2860 or similar) used in many low-cost USB video capture dongles. The device usually features:
The UTV007_Drivers.zip hosted by Scott Danesi is also known to work reliably. Steps to Download: Click the link above to GitHub. Click the green "Code" button. Select "Download ZIP" . Extract the ZIP file to a known location (e.g., Desktop). 3. Installation Guide (Step-by-Step) But he couldn’t reboot
The most reliable source for the USBTV007 driver is the physical CD that came with the device. On that CD, the necessary driver files are typically located in the Drivers\ATV007_Win7_32 or Drivers\ATV007_Win7_64 folder. The current driver version is known to be , dated 08/06/2011.
, which remain compatible with Windows 10 and even Windows 11. Verified Sources: You can find community-hosted driver packages at Scott Danesi’s Blog or specialized repositories like Samuel Carreira’s GitHub Driver Identification: If you're unsure, look for driver version , often listed on sites like Driver Scape Step 2: Manual Installation via Device Manager
Follow these steps carefully to install the drivers manually on Windows 10/11 64-bit.
Open and right-click your unknown USBTV007 device. Select Update driver . Click Browse my computer for drivers .
Note: Because these drivers are often unsigned and hosted on third-party sites, always run a virus scan on any downloaded driver packages before installing them.