Resetter Epson L3150 Updated [verified] Jun 2026

Which (e.g., Windows 10, Windows 11) is your computer running?

In many cases, the resetter is also used for professional maintenance tasks, such as adjusting print head alignment, initial ink charging, and even performing EEPROM initialization. In the context of the Epson L3150 specifically, "updated" versions (often versions 1.0.2 or 1.0.3) provide broader compatibility with modern operating systems like Windows 10 and 11.

Navigate to your extracted folder, right-click on , and select Run as Administrator . Step 2: Select Your Model

To reset an Epson L3150 printer, you generally need to address either the (waste ink pad) error or reset the device's network settings . While official software updates are available through Epson Support , waste ink resets often require specialized utilities. 1. Resetting the Waste Ink Pad Counter

There are two primary ways to address this issue as of 2026: 1. Epson Adjustment Program (Resetter Software) resetter epson l3150 updated

Before starting, ensure your printer is connected via a ; Wi-Fi resets are generally not supported for this model. Step 1: Preparation & Safety

: Turn off the printer. Hold the Network Status button and press the Power button until the Wi-Fi lights flash alternately. Release both, and the settings will return to factory defaults.

Note: Many free versions fail with newer firmware. Always look for files dated .

: Press and hold the Power and Information (i) buttons together until the Wi-Fi lights blink. Which (e

If your firmware is , almost any resetter works. If it is 2.4.x to 2.8.x or higher , you absolutely need an updated resetter (October 2024 or later release).

If you are dealing with minor connectivity or logic errors rather than a waste ink pad issue, try these steps:

The is the most reliable cross-platform tool. Unlike broken “adjustment programs,” WIC is actively maintained.

A critical point often overlooked by online tutorials: resetting the counter without replacing the physical waste ink pads carries risk. If the pads are genuinely saturated, repeatedly resetting the counter can lead to ink leaking inside the printer, potentially causing irreparable damage. If you have printed tens of thousands of pages, it is strongly recommended to have the waste ink pads replaced at an authorised service centre before simply resetting the counter. Navigate to your extracted folder, right-click on ,

To ensure the adjustment software runs smoothly without errors (such as communication errors or freezing), prepare your computer setup first:

Download the tool as a .zip or .rar archive and extract it using WinRAR or 7-Zip to a dedicated folder on your desktop.

Under the dropdown, select the specific USB port where your printer is connected (it usually says USBxxx (L3150 Series) ). Do not leave it on "Auto Selection." Click OK . Step 3: Navigate to the Waste Ink Pad Counter

: Click OK on the confirmation pop-up. Turn your printer OFF and then back ON when prompted. ⚡ Quick Manual Reset Options