Hp Fxn1 E93839 Motherboard Specs Jun 2026

2 or 4 DIMM slots (configuration depends on the exact HP chassis revision)

Integrated Intel HD Graphics (CPU dependent) with DisplayPort and VGA outputs. Audio: Integrated High Definition Audio. 5. Storage and Expansion

HP FXN1 E93839 Motherboard Specifications: A Comprehensive Guide hp fxn1 e93839 motherboard specs

HP often uses proprietary 4-pin or 5-pin fan headers. If you connect a standard 3-pin or 4-pin aftermarket CPU cooler or chassis fan, you may encounter a "Fan Not Detected" error during POST (Power-On Self-Test), requiring you to press F1 every time you boot. Final Thoughts for Upgraders

To get the most out of this platform, you will want to replace the stock processor with a high-end Ivy Bridge CPU. A user in a related forum thread detailed their setup with a , which is a 22nm, 3.5 GHz, 4-core/8-thread processor that is fully compatible with the LGA 1155 socket. This is likely the fastest CPU you can install without overclocking. 2 or 4 DIMM slots (configuration depends on

| Feature | HP E93839 FXN1 | ASUS P8Z77-V | Gigabyte GA-B75M-D3H | | :--- | :--- | :--- | :--- | | | Q65 / Q67 / Q77 (Proprietary) | Z77 (Enthusiast) | B75 (Budget/Office) | | CPU Overclocking | No | Yes (Unlocked) | No | | RAM Support | 32GB DDR3 | 32GB DDR3 | 32GB DDR3 | | PCIe x16 Slots | 1 | 3 (x16/x8/x8 or x16/x8/x4) | 2 (x16/x4) | | SATA III (6Gb/s) | 2x on Q77 only | 4x | 1x | | USB 3.0 Ports | Up to 6 (Q77 only) | 4x (Rear) + 2x (Header) | 4x (Rear) | | Form Factor | Proprietary micro-ATX | Standard ATX | Standard micro-ATX |

While it is technically possible, it is not recommended. Third-party cases often lack a matching I/O shield, and the proprietary front-panel header requires adapter cables. However, it will operate as a standard test bench without a dedicated case. A user in a related forum thread detailed

Up to 16GB (for 2-slot variants) or 32GB (for 4-slot variants)

While the physical dimensions resemble a Micro-ATX board, the mounting screw holes and front-panel headers conform to HP’s proprietary case engineering. Installing this motherboard into a standard aftermarket PC case requires modification, as the front panel header pins (power button, status LEDs) do not use standard layouts. 3. Cooling Fan Headers

It does not use a standard 24-pin ATX power connector. It uses a proprietary HP 6-pin or 6+4-pin connector. To use a standard aftermarket Power Supply Unit (PSU), you must buy a 24-pin to 6-pin adapter .

The motherboard provides a robust set of expansion options suitable for upgrading graphics, storage, and I/O capabilities.