Canon Service Tool V5510 Jun 2026
The is a proprietary, Windows-based software utility designed for service technicians to perform low-level maintenance and reset functions on specific Canon inkjet printers, primarily those in the PIXMA MG5500 series (e.g., MG5520, MG5550, MG5570) and similar models from that generation.
Download and extract the archive file.
The green/blue power light should flash for a few seconds and then . If the light remains solid, your printer has successfully entered Service Mode. Your PC may notify you that it found new hardware. Phase 2: Running the Reset Software
The waste ink absorber is nearly full (warning stage).
If you lose power during the EEPROM write process, or if you click the wrong button (e.g., "Clear EEPROM" without a backup), your printer may become an expensive paperweight. canon service tool v5510
While holding the Stop button, press and hold the Power button.
: Enables deep cleaning cycles and provides diagnostic reports to identify technical hurdles before they escalate.
A pop-up message saying "A function was finished" should appear. Click .
The Canon Service Tool V5510 is a powerful tool aimed at professionals who need to perform in-depth maintenance and repairs on Canon printing equipment. This software allows technicians to access and adjust various printer settings, perform diagnostic tests, and execute repairs that are not available through standard user interfaces. If the light remains solid, your printer has
: Allows for direct manipulation of printer settings and the printing of service information pages. Technical Compatibility & Requirements
Resets the main and platen waste ink absorber counters back to 0%.
After replacing a print head, the tool can register the new head's ID and initiate precision alignment not available via the standard driver.
Press and hold the physical button (triangle icon). While holding Stop/Reset , press and hold the Power button. Keep holding Power , then release the Stop/Reset button. If you lose power during the EEPROM write
The software will automatically detect your connected printer port. If all options are greyed out, your printer is not in Service Mode. Go to the tab. Locate the Clear Ink Counter section. Set the Absorber dropdown option to Main .
: Forces a hardware-level flush of clogged nozzles.
The only remedy is physically desoldering the EEPROM chip from the motherboard or replacing the entire mainboard assembly. Safe Practices
Generates deep-level nozzle checks and alignment grids to diagnose hardware faults, feed issues, or sensor failures. Supported Canon Printer Models
Canon service tool version 5510 or higher - PrinterKnowledge