Delphi Ds100e: Firmware Update Problem Link [work]

The Delphi software relies on specific FTDI USB-to-serial drivers. If Windows automatically updates these drivers, the software lose its link to the hardware.

Maya slumped in her chair, her spacesuit still half-unzipped. She opened a final message to Greg.

demonstrates how to navigate the COM port settings to ensure the update doesn't fail. Note on Versions : Ensure the firmware version in your software folder ( ...\Delphi\Firmware

Select or manually choose the matching COM Port . Click Test .

: Locate the MCU (STM32 chip) and carefully bridge specific legs (often pins 108 and 138) with a wire to enter Boot Mode. delphi ds100e firmware update problem link

Download a verified firmware version compatible with your hardware (commonly version for older clones, or 3201 for newer single-boards).

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

To make matters worse, direct "official" download links for firmware versions (such as 1423, 1532, 1622, or 1310) are rarely indexed on standard search engines without deep forum access. The goal of this article is to dissect the common issues, identify the root cause of the hardware conflicts, and provide the solutions—including the community-sourced links and manual fixes—that can bring your DS100E back to life.

Thanks in advance.

Check if your VCI is properly recognized in Windows Device Manager. If not, you may need to reinstall the drivers .

Right-click the device and select , then go to Port Settings > Advanced .

Click first. If the test shows "Device Found" but with a firmware version mismatch, then proceed to click Update Firmware .

: The software scans the wrong virtual COM port. The Delphi software relies on specific FTDI USB-to-serial

If your DS100E is currently unresponsive or stuck in a boot loop, follow this prioritized recovery flowchart:

Plug the 16-pin OBD2 connector of your DS100E into a vehicle's OBD port, or connect it to a stable 12V external power supply on your workbench. Once powered by 12V, connect the USB cable to your PC. 2. Verify Windows Device Manager Drivers

Windows frequently reassigns COM ports, which breaks the update link. Open on your PC.