Press and hold the button continuously for exactly .
The Yettr6 fails to pair via Bluetooth or drops its Wi-Fi local network connection during data transfers.
continuously flashes its blue or red LED light but fails to connect to your headphones or phone, it is usually stuck processing a corrupted Bluetooth cache.
Locate the recessed button (typically found on the bottom or back of the chassis).
If your device is already set up but acting erratically, look for your specific symptom below to apply the correct fix. Error: "Device Not Detected" or Connection Drops
| Icon / Condition | Meaning | What to Do | | :--- | :--- | :--- | | | Will stop accepting a charge to protect the battery. | Move it to a warmer place. Insulation helps (e.g., put it in a cooler). | | Extreme Cold (< -4°F / -20°C) | Will stop outputting power. | Move it to a warmer place. | | Very Hot (> 113°F / 45°C) | Will stop accepting a charge. | Move it to a cooler, shaded, well-ventilated area. | | Extreme Hot (> 149°F / 65°C) | Will stop outputting power. | Move it to a cooler, shaded, well-ventilated area. |
Delete the temporary cache files of the Yettr6 app via your phone’s storage settings.
The Yettr6 operates optimal performance on specific Wi-Fi bands. If your router broadcasts a unified SSID for both 2.4GHz and 5GHz bands, split them in your router settings. Force the Yettr6 to connect to the less congested 2.4GHz band for longer range, or the 5GHz band for faster data throughput near the router.
What or light pattern is your device displaying?
Distortion or low signal quality is typically a physical hardware issue rather than a Bluetooth failure:
: Move the adapter away from high-interference electronics like dual-band Wi-Fi routers or micro-appliances. 📋 Comprehensive Operating Checklist LED Status Cable Insertion Port Source Device Target Output Device Stream TV audio to wireless headphones Solid Blue (TX) TRANSMIT Port TV Aux-Out Jack Bluetooth Headphones Stream phone music to wired car stereo Solid Red (RX) RECEIVE Port Smartphone Bluetooth Car Stereo Aux-In Stream PC audio wirelessly (No Aux Cable) Solid Blue (TX) None (USB Only) PC Audio Options Bluetooth Speaker
Use this to send audio from a non-Bluetooth device (like a TV or MP3 player) to your Bluetooth headphones.
Aumotop YETTR6 5.0 Transmitter Receiver Dual ... - Amazon.com
Put your Yettr6 into pairing mode (consult your specific sub-model instructions, usually accomplished by holding the sync button for 5 seconds).