Acer Aahd3vc Motherboard Manual Install

Connect to Pins 1 (+) and 3 (-)

If your CPU cooler does not have pre-applied paste, apply a pea-sized drop to the center of the CPU integrated heat spreader (IHS).

Reconnect your monitor to the integrated graphics ports (VGA/DVI/HDMI) on the motherboard, or to your dedicated graphics card if you installed one.

: The board supports DDR3-SDRAM (240-pin). Open the clips on the DIMM slots and press the memory modules down until the clips snap back into place. acer aahd3vc motherboard manual install

Standard 24-pin ATX power and a 4-pin CPU power connector. 2. Front Panel Pinout Guide (The "JFP1" Header)

Ensure your computer chassis supports Micro-ATX motherboards. Install the motherboard standoffs into the case holes that match the AAHD3VC layout.

Plug your case's front USB 2.0 cable into the 9-pin headers labeled F_USB . The connector has one blocked pin-hole that matches the missing pin on the motherboard, preventing incorrect insertion. Connect to Pins 1 (+) and 3 (-)

1x PCI Express x16 (for discrete GPUs like the OEM Radeon HD 8470). 1x PCI Express x1. 1x Standard PCI slot. 4x SATA ports for HDDs or SSDs.

Before securing the board in your case, prepare the primary components to ensure they are seated correctly.

Hook the clips of the heatsink onto the plastic tabs or screw them down evenly in a cross-pattern to distribute pressure. Open the clips on the DIMM slots and

| Feature | Specification | | :--- | :--- | | | Micro-ATX | | Chipset | AMD A75 FCH (Hudson D3) | | CPU Socket | AMD Socket FM2 | | CPU Support | AMD A10/A8/A6/A4 Series APUs (Trinity/Richland) | | Memory | 4 x 240-pin DDR3 DIMM slots | | Max Memory | 32 GB DDR3 | | Memory Support | 1333 MHz, 1600 MHz, 1866 MHz | | Memory Architecture | Dual Channel, Non-ECC Unbuffered | | Storage | 6 x SATA 3.0 (6Gb/s) ports, RAID 0/1/10 support | | Expansion | 3 x PCIe 2.0 x1 slots, 1 x PCIe 2.0 x16 slot (if equipped) | | Audio | 7.1 Channel High Definition Audio | | LAN | Gigabit Ethernet (Realtek RTL8111E likely) | | Video Outputs | D-Sub (VGA) and DVI-D, HDMI or DisplayPort depending on exact config | | Internal I/O | 1 x 24-pin ATX, 1 x 4-pin CPU, 3 x USB 2.0 headers, 2 x USB 3.0 headers | | Rear I/O | 4 x USB 2.0, 3 x USB 3.0, PS/2, LAN, audio jacks |

Pro tip: If your case uses a standard 9-pin block, use a multimeter in continuity mode to map the traces, or refer to our pinout diagram below.

What are you trying to fit this board into?

This guide provides concise, step-by-step instructions for manually installing or reinstalling an Acer AAHD3VC motherboard into a compatible desktop chassis. It assumes you have the replacement motherboard, compatible CPU, RAM, power supply, storage devices, cooling, and basic tools (Phillips screwdriver, anti-static wrist strap).

Plug your case's HD Audio cable into this header. It is keyed with a blocked pin slot so it can only be installed one way. 3. Storage Drives (SATA)