Set the . For the WS-6906, the default baud rate is typically 115200 or 19200 .
: You generally need to load the .bin firmware file into the PC software first, then power on the WS-6906 to initiate the transfer.
: A built-in "beeper" sound alerts you when a signal is locked, allowing for hands-free dish alignment.
: Outdated transponder data causes the meter to lock onto the wrong satellite.
Click “Finish” when the upgrade completes. Your SATLINK WS6906 should now be updated. satlink ws6906 software upgrade
(Included with the original kit). Method 1: Upgrading via RS-232 Port (Recommended)
Ensure your adapter drivers are installed and assigned to a functional COM port in Windows Device Manager. Step-by-Step Software Upgrade Process
If your device is the compatible version, the official upgrade source is the Satlink website. The product page at http://www.sat-link.co.uk/store/SatLink-WS6906-DVB-S-Satellite-Finder-Meter-WS6906_SATLINK.html offers a software download at a cost.
during this process.
If you use a motorized dish, enter . Test the “Go to Reference” and “Store Position” commands. Some updates fix stalled motor communication.
Press the button and observe the noise floor. A good upgrade reduces internal noise and improves the dynamic range, making it easier to locate weak feeds.
: Ensure the meter is fully charged to prevent power loss during the flash process. Software Upgrade Procedure (PC-Based) Connect the Device : Connect the
If you encounter issues during the process, use these standard troubleshooting techniques to resolve them. "Target Not Connect" or No Progress Bar Response Set the
Last updated: October 2025 – Compatible with Satlink WS6906 hardware revisions V2.0 to V3.2
If no official update exists for your hardware version, to flash generic files. Many WS-6906 meters are shipped with final stable firmware already.
Windows PC (Note: USB-to-RS232 drivers may be required for modern systems). SatlinkTools or Upgrade.exe utility.
If a flash fails, the device may appear dead. You may need to perform a "blind flash" or use a specialized recovery tool if the bootloader is still intact. Conclusion : A built-in "beeper" sound alerts you when
to your PC using the RS-232 cable. Keep the finder initially.
Optimization in the software can help the tuner lock onto signals faster and with higher precision.