Low-pressure nozzle. Use this exclusively when drawing detergent from the chemical tank.
If you encounter common issues, here are some places to start looking before calling for service.
Low-pressure chemical nozzle. Use this exclusively when applying detergent from the onboard soap tank.
Remove all parts from box:
Congratulations on your new Rok power washer. You're now ready to use it safely and effectively, whether you're washing your car or rejuvenating your patio. Always prioritize safety and enjoy the satisfaction of a job made easier.
Before you even plug in your new pressure washer, please take a moment to review these critical safety rules. High-pressure water can be dangerous.
: Always wear closed-toe shoes and eye protection—the spray can be powerful enough to break skin. How to setup and start a pressure washer rok power washer instructions new
Petrol engines are usually shipped without oil. Do not start the engine without adding oil. Check the manual for the exact grade (typically SAE 10W-30), unscrew the dipstick, and fill to the indicated mark.
: Attach the water inlet filter first, then connect your standard garden hose. Lance & Nozzle
Move the choke lever to the "Closed" position, set the throttle to fast, and pull the starter cord. Once started, move the choke to "Open." 4. Using the Nozzles and Detergent Low-pressure nozzle
Low-pressure nozzle. This is the only nozzle that will draw detergent from the onboard soap tank or siphoning tube. 5. Applying Detergents and Soap
Periodically unscrew the garden hose adapter and pull out the mesh filter screen. Rinse away any trapped sand, dirt, or hard water deposits.
Screw or snap the spray gun holder onto the side of the frame. Low-pressure chemical nozzle
: For petrol models, check that engine oil (typically SAE 10W30) is at the proper level and fill the tank with fresh unleaded fuel. 3. Starting the Machine