Shell Alvania G3 Data Sheet

: Typically effective from -20°C to +130°C (with peaks up to 135°C).

Shell Alvania G3 Go to product viewer dialog for this item. Data Sheet: Technical Specifications, Applications, and Modern Replacements The Shell Alvania G3

Shell Gadus S2 V100 3 (This is the direct modern equivalent in NLGI 3).

Meddings M4/MF4 Pillar Drill This is the correct modern day equivalent grease which replaced Shell Alvania Grease 3. Lube finder Shell Gadus S2 V100 3 Grease (formerly Shell Alvania Rl3) Shell Gadus S2 V100 3 Grease (formerly Shell Alvania Rl3) Med-lab.co.uk Shell Gadus S2 V220 3 shell alvania g3 data sheet

The grease resists softening, even under severe vibration and shock loading, ensuring it stays in the bearing, reducing the need for frequent re-lubrication.

The following specifications are typical for the Alvania G3/S3 series as detailed in historical technical data sheets : Characteristic Specification Grade 3 (Medium/Hard) Thickener Type Lithium hydroxystearate soap Base Oil Type Highly refined mineral oil Base Oil Viscosity ~100–130 cSt @ 40°C Dropping Point ~180°C to 190°C Operating Range -20°C to +130°C (up to +135°C intermittently)

Shell Alvania G3 is a premium-quality, general-purpose industrial grease formulated with high-viscosity index mineral base oils and a lithium soap thickener. It contains oxidation, rust, and corrosion inhibitors to prolong component life. Test Method Typical Value 3 Thickener Type Lithium Soap Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked 60 Strokes 220–250 (0.1 mm) Dropping Point 180°C (356°F) Operating Temperature Range -20°C to +120°C Color / Appearance Brown, smooth Key Performance Features 1. High Resistance to Water Washout : Typically effective from -20°C to +130°C (with

2. Shell Alvania G3 (Gadus S2 V100 3) Technical Specifications

The technical values in this article are based on publicly available Shell product documentation as of the publication date. For critical applications, always refer to the current official Shell Alvania G3 data sheet and consult a lubrication engineer. This article is for informational purposes and does not constitute professional engineering advice.

Used in heavy-duty industrial applications where moisture, high loads, and elevated temperatures coexist. Meddings M4/MF4 Pillar Drill This is the correct

To ensure you have the exact match for your equipment, you can verify the latest technical specifications on the Shell Gadus S2 V100 3 Official Data Sheet .

| Property | Value | Implication | |----------|-------|--------------| | Thickener | Lithium complex | Excellent mechanical stability, high dropping point. | | NLGI Grade | 2 | Standard consistency; suitable for most centralized systems and bearings. | | Dropping Point | >260°C (500°F) | High temperature capability before liquefying. | | Operating Temperature | -20°C to 150°C (-4°F to 302°F) | Broad range; intermittent use up to 150°C. | | Base Oil Viscosity (40°C) | ~150 cSt | Medium-viscosity oil – good film strength for normal to slightly heavy loads. | | Base Oil Type | Highly refined mineral oil | Good oxidation resistance, but not synthetic. | | 4-Ball Weld Load (ASTM D2596) | ~260-280 kg | Moderate extreme pressure (EP) performance. | | Water Washout (79°C) | <5% loss | Excellent resistance to water washout. | | SKF EMCOR (Rust) | 0-0 (pass) | Excellent corrosion protection in fresh/salt water. |

Resists chemical degradation at high operating temperatures, extending re-lubrication intervals.