Viva Water Dispenser Manual 8liech-sc-ssd New! Jun 2026

Maintain at least 4 inches (10 cm) of clearance between the back of the unit and the wall for proper ventilation. 2. Installing the Water Bottle Open the bottom cabinet door.

Your water dispenser is a robust, feature‑packed appliance that will serve you for years if it is properly maintained. The self‑clean ozone technology reduces the need for frequent manual cleaning, but you should still empty the drip tray regularly and perform a full flush of the water lines every three months. Most minor issues – such as water not being cold enough or an intermittent beep – are resolved simply by waiting for the ice bank to form or by changing the water bottle.

: The internal tank is currently warming water. It will turn off once it hits the target temperature. Cooling (Blue)

This report reviews the Viva 8LIECH-SC-SSD water dispenser model (hereafter “Viva 8LIECH”), focusing on its specifications, installation and setup procedure, user manual clarity, operation, safety features, maintenance, troubleshooting, and recommendations for improvement. The goal is to evaluate usability, safety, and documentation quality for end users and service technicians. viva water dispenser manual 8liech-sc-ssd

The dispenser accepts standard . For 5‑gallon square bottles, you may need to slide the bottle into place rather than dropping it straight in – refer to the illustration in the manual.

Your dispenser is equipped with an that automatically cycles on multiple times per day. Ozone (O₃) is injected directly into the water tank and plumbing, where it:

Although the self‑cleaning system handles the heavy lifting, there are a few manual cleaning tasks you should perform periodically. Maintain at least 4 inches (10 cm) of

Prevents the formation of Biofilm inside the water cooler. Stainless Steel Finish: Durable and modern aesthetic. Ice Bank Cooling: Ensures consistently ice-cold water. Child Safety Lock: Protects children from hot water burns. 3. Installation and Setup Guide Follow these steps to get your dispenser ready for use:

Note: The 8LIECH‑SC‑SSD is the “Self Clean” variant. The closely related 8LIECH‑SC‑SSF (stainless‑steel finish) and 8LIECH‑SC‑SP (electronic control) share most components, so instructions from those manuals also apply to the SSD model.

: Maintain at least 4 inches of clearance from the wall and on both sides to ensure proper airflow for the compressor. Your water dispenser is a robust, feature‑packed appliance

The proprietary heating system maintains water at

Before using the dispenser for the first time, sanitize the internal reservoirs.