Firstchip Fc1178 Fc1179 Mptools V1052 Install |top| Now
If the tool doesn't see your drive, try a different USB port (preferably a USB 2.0 port) or use a different version of the MPTool. "No Flash ID":
FirstChip is a prominent manufacturer of USB flash memory controllers. The FC1178 and FC1179 are highly common controllers found in budget, promotional, and unbranded USB flash drives.
Fixing "fake" capacity drives (e.g., a drive sold as 128GB that is actually 32GB) to show their true stable size.
Inside the configuration window, adjust the following parameters based on your repair needs: firstchip fc1178 fc1179 mptools v1052 install
Click on the button located at the top or side menu panel. A password prompt window will pop up.
: Click "Start" and wait for the process to reach 100%. Do not unplug the drive until the status indicator turns green or shows "Success." Common Troubleshooting
How to Download and Use FirstChip FC1178 & FC1179 MPTools V1052 for USB Flash Drive Repair If the tool doesn't see your drive, try
FirstChip and FC1179 MPTools (Mass Production Tools) are specialized software used to repair, reformat, or restore USB flash drives that use FirstChip controllers. These tools are often the only solution for fixing "fake" drives with inflated capacities or drives that show "No Media" errors. Pre-Installation Requirements
: If prompted for a password to enter settings, common defaults include leaving it blank or using 320 , though some versions may differ. Flashing Process :
Locate the executable file (usually named FirstChip_MpTools.exe or MPTools.exe ). Right-click the executable and select . Step 4: Change Language to English By default, the tool may open in Chinese. Fixing "fake" capacity drives (e
To confirm your drive uses FC1178 or FC1179:
Step-by-step A. Identify device in Device Manager
This usually means the controller cannot communicate with the NAND memory chip, suggesting physical damage or a severe firmware corruption. direct download link for this specific version or more detail on error codes
Click the button located at the top-right corner of the interface.
