This specific hex code is assigned by the USB Implementers Forum (USB-IF) to Kingston Technology .
Visit the official Kingston Support page for model-specific drivers and tools.
Launch the flashing tool configuration executive executable (e.g., MPParamEdit.ini ).
The term "patched" has two clear meanings for USB drives: usb device id vid 0951 pid 1666 patched
The corresponds directly to the widespread Kingston Technology DataTraveler 3.0 series , including the DT100 G3, DT50, and DTSE9 G2 flash drives. When a drive with these hardware identifiers suddenly switches to a "Write Protected" mode, fails to format, or completely vanishes from Windows Explorer, it usually means the underlying firmware inside its Phison PS2251-07 (PS2307) controller has crashed or corrupted.
Search specialized databases (such as USBDev or FlashBoot) for the exact controller number found in Step 1. You will need: The MPTool version compatible with your controller. A matching Burner image (e.g., BN07*.BIN ). A matching Firmware image (e.g., FW07*.BIN ). Step 3: Configure the MPTool (The Patching Phase)
to rewrite the drive's firmware. This is often a last resort when a drive becomes "Write Protected" or unrecognized. Super User This specific hex code is assigned by the
The drive holds data but cannot be formatted or added to 1.2.2.
, where the firmware doesn't recognize the specific NAND flash chip soldered onto the board.
The USB device ID corresponds to the widely used Kingston DataTraveler 100 G3 / Exodia USB 3.0 flash drive. When users search for a "patched" version of this ID, they are typically trying to resolve a firmware corruption that causes the drive to become permanently write-protected (read-only), or they are modifying driver files to force an operating system to recognize a malfunctioning controller. The term "patched" has two clear meanings for
Run the tool to locate the exact (e.g., Phison PS2251-19). Document the specific Flash ID Code (e.g., 983E980376E4 ). Step 2: Source the Patched Firmware Files
Use the latest versions available on developer forums like USBDev.ru .
The most technical reason involves the drive's internal controller. Many Kingston DT 101 G2 drives use a controller from Phison or SSS (Skymedi). By applying a , users can:
The VID 0951 PID 1666 drives typically utilized the or the Phison PS2251 controller series. These are "mass production" controllers—cheap, efficient, and designed to squeeze maximum performance out of budget memory chips.
One feature of this device is that it likely supports , allowing it to be recognized by most operating systems as a removable storage device, enabling file transfer and storage.