Updating the software on your Satlink WS-6933 satellite finder is primarily done to refresh transponder (TP) lists, improve signal sensitivity, and fix firmware-related stability issues. The process is typically handled via a PC connection using the device's USB port. 1. Preparation & Requirements Before starting, ensure you have the following: USB Cable: A standard cable to connect the meter to your PC. Update Software: You will need the SatlinkTools or a similar loader utility (like Flash Loader ) provided by the manufacturer or authorized distributors. Firmware File:
If your PC doesn't detect the device, check your Windows Device Manager to ensure the proper USB-to-Serial drivers are installed. Update Failed:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Charge your WS-6933 to at least 80% to prevent the device from shutting off mid-update. 2. Software Requirements
Ensure the firmware matches your hardware's flash memory capacity (typically 128kb or 256kb) to avoid errors. 2. Step-by-Step Update Process Satlink WS-6933 DVB-S2 Satellite Finder Meter User Manual satlink ws-6933 software update
: Power on the Satlink WS-6933 and connect it to your computer. The PC should recognize the device; if not, you may need to install specific COM port drivers.
or the original RS232 cable provided with the meter (The WS-6933 typically uses an RS232 serial connection for data transfer, although some newer "HD V2" models may support USB). Windows PC (laptop or desktop).
The satellite landscape is constantly evolving. Transponders are added, frequencies change, and older satellites are decommissioned. Without a software update, your meter might search for signals that no longer exist or miss new ones entirely. Key benefits of an update include: Improved accuracy in signal strength and quality readings.
| Item | Specification | |------|----------------| | | Windows 7, 8, 10, or 11 (32/64-bit) | | USB Cable | USB-A to USB-B (printer cable) – not a charging-only cable | | Power source | Fully charged WS-6933 battery or DC adapter | | Firmware file | WS6933_Update_Vx.x.bin (example name – verify with source) | | Driver | Prolific PL2303 or similar USB-to-serial driver (if using RS-232 mode) | Updating the software on your Satlink WS-6933 satellite
Write this down. If the available update matches or is older, do not proceed.
In the tool, select the correct corresponding to your USB cable (you can check this in Device Manager). Set Upgrade Type to "All Code" or "Firmware". 5. Select the Firmware File Click the "Browse" or "Open" button in the software.
Software updates are essential for the Satlink WS-6933 because they provide several benefits, including:
A lightweight executable file (.exe) used to push files from your PC to the meter. Preparation & Requirements Before starting, ensure you have
Check that the cable is not damaged. Ensure the meter is fully charged.
If you are a satellite installer, technician, or a passionate satellite TV hobbyist, the Satlink WS-6933 DVB-S/S2 HD satellite finder Go to product viewer dialog for this item.
Only use firmware designed specifically for the WS-6933. Installing firmware from a different model (e.g., 6906) will cause errors.
What is listed in your device's system settings?
Check Device Manager for the correct COM number; try a different USB port. Incorrect power-on sequence.