Put your ZTE device into FTM mode (usually by holding the and Power buttons simultaneously while powering on). Connect the device to your PC using your USB cable.
adb reboot bootloader adb reboot recovery
On Windows 10/11, you may need to disable driver signature enforcement to install unofficial drivers. 2. How to Exit FTM Mode
Understanding and Installing ZTE FTM Drivers ZTE FTM () drivers are specialized communication tools used to connect your computer to a ZTE device when it is in a diagnostic or testing state. These drivers are essential for developers, technicians, and advanced users who need to perform deep-level tasks like firmware flashing, IMEI repair, or network testing. What is FTM Mode? zte ftm drivers
Connect your device using an original USB cable. Avoid loose ports or cheap aftermarket cables.
When your ZTE phone is unresponsive, don’t panic. Boot into FTM mode, install the correct drivers, and regain control—one COM port at a time.
Some ZTE devices require the phone to be in FTM mode before unlocking the bootloader or flashing a custom recovery image. Put your ZTE device into FTM mode (usually
: If the hardware key combination fails, you can try entering the dialer code *983*87274# and selecting the "only Diag" option. If that doesn't work, adb reboot ftmmode via a PC is another potential method.
What are you planning to use with the FTM drivers?
: Power off the phone. Hold the Power and Volume Down buttons together until the screen shows "FTM". 3. Manual Driver Assignment (The "Good Write-up" Fix) What is FTM Mode
For developers, technicians, and advanced users, FTM mode acts as a gateway to the device's partition structure. When a ZTE device is in FTM mode, it exposes hidden diagnostic serial ports (COM ports) to your computer. Through these ports, specialized service tools can communicate directly with the device's modem and processor. Why Do You Need ZTE FTM Drivers?
If you are stuck in FTM mode and need to get back to the Android system: