Thyssenkrupp Levant Stair Lift Installation Manual //top\\

is designed for narrow spaces and can typically be fitted on staircases as narrow as .

: Verify the lift is properly placed on the charging contact and clear any obstacles. If the issue persists, it is strongly recommended to reach out to your provider for further support, as the manual advises against DIY repairs.

The ThyssenKrupp Levant operates on a 24V DC battery system. The batteries charge automatically when the lift parks at either landing. Wiring the Charging Strips

Once professionally installed, the Levant is designed to be extremely user-friendly. The official user manual details the proper operation cycle. thyssenkrupp levant stair lift installation manual

Before unboxing the stair lift, you must inspect the staircase and gather the necessary technical tools to ensure a precise, secure installation. Structural Requirements

Ensure the copper charge strips located at the top and bottom ends of the rail are clean and properly seated. These strips contact the charging shoes on the carriage when the lift is parked. Step 2: Connecting the Transformer

Run the thin electrical wire from the power transformer along the back channel of the rail, clipping it securely out of the way of any moving parts. Connect the positive and negative leads to the respective terminals on the charging blocks. is designed for narrow spaces and can typically

Ensure there are no handrails, molding, or doors that will interfere with the chair's path.

Clean the aluminum rail with a dry, lint-free cloth to remove dust and debris. Avoid using liquid cleaners or abrasive materials.

| Mistake | Consequence | |---------|-------------| | Rail not level | Uneven wear, binding, noisy operation | | Brackets too far apart | Rail flex, stress fractures | | Charger cord pinched | Fire risk, charger failure | | Limit cams mis-set | Carriage crashes into end caps | | Ignoring shims | Rail twist, misalignment | The ThyssenKrupp Levant operates on a 24V DC battery system

The Levant features sensitive safety edges on the footrest and both sides of the carriage chassis. Gently press each edge while driving the unit; the lift should instantly cease movement in that direction. If it continues moving, immediately cut power and inspect the internal microswitches. Emergency Limit Switch Verification

Check the main key switch, ensure the seat is fully rotated into the locked riding position, and verify the wall outlet has power.

Critical checks include testing the obstruction-stop sensors , the safety belt , and the swivel seat lock. 3. Critical Safety & Maintenance Battery Care: The

| Specification | Details | |---|---| | | Levant / HomeGlide by ThyssenKrupp Accessibility B.V. | | Intended Use | Transport of one mobility-impaired person up and down straight stairs (indoors/outdoors) | | Maximum Load Capacity | Standard: 125 kg; Some variants: 137 kg - 140 kg | | Maximum Speed | 0.15 m/s | | Power System | Battery-operated with automatic recharging; uses 2 pieces 7AH 12V batteries | | Battery Range | Up to 15 journeys during a power outage | | Rail System | Aluminum rail fixed on stairs | | Mounting | Can be installed on either side of the stairs | | Standard Features | Foldable footrest, manual swivel, padded seat | | Comfort Option | Premium chair with straight/curved armrests, luxurious seat, upholstery choices, adjustable seat height, powered swivel | | Outdoor Option | Waterproof control, cover, coated electronics/switches, charging contacts, and step-up transformer for all-weather use | | Safety Standards | Complies with ASME 18.1 safety standards |