Icom officially discontinued the IC-F310 in 2020, replacing it with the (which uses the much more modern CS-F3200 software with native USB support). However, hundreds of thousands of F310 units remain in service.
This utility was originally developed as a native MS-DOS application . It does not run natively on modern 64-bit operating systems like Windows 10 or Windows 11.
The Icom IC-F310 is a popular commercial-grade portable two-way radio (VHF/UHF, analog & digital NXDN capable depending on version). The official programming software is required to change frequencies, tones, scan lists, button assignments, and other advanced settings—you cannot field-program these radios from the keypad.
Click (or similar menu option) to pull the current settings from your IC-F310. This ensures you are modifying the existing configuration. 4. Edit Settings Icom Ic-f310 Programming Software
The cable connects directly to the microphone socket on the front of the radio. 3. Key Programming Features
: You can find modern USB programming cables that replace the
The adjustment software warns: If the EEPROM (the chip storing settings) is replaced or corrupted, the radio may beep and display an error until you reload the saved .icf file backup. Never lose your original factory backup file. Icom officially discontinued the IC-F310 in 2020, replacing
Click (or Clone -> Read depending on the software version).
A progress bar will appear. Do not bump the cable or turn off the computer/radio during this phase.
Always click "Read" from the radio before making changes. This creates a backup of the current settings. Edit Channels: It does not run natively on modern 64-bit
Select the required Tone (CTCSS/DTCS) and Wide/Narrow settings. 5. Configuring Key Functions
Legacy radio equipment can sometimes be difficult to link with modern computers. If you run into issues, try these troubleshooting steps:
Here are some troubleshooting tips for common issues:
: The CS-F300 (or CS-F300S ) cloning software is designed for data setting and cloning for the IC-F310 and IC-F320 series. Note that original versions typically run on MS-DOS (ver. 5.02 or higher), requiring a compatible environment or older hardware. Cloning Cables : OPC-478 : An RS-232 or USB-to-serial cloning cable.