Wittmann Tempro Plus D 360 Manual Exclusive ~repack~ Jun 2026

WITTMANN's philosophy behind the Tempro series is consistent: smaller is smarter. By incorporating a smaller heat exchanger, the circulating water volume is minimized. This design choice leads to significantly shorter preheating and cooling times, directly translating to faster cycle times and increased productivity. This foundational principle is evident across the entire line, including the D360.

Since this is a proprietary industrial product:

* » Line evacuating for mold changing. * » External sensor socket for PT 100 sensors. » Air purging (unlimited mold purge for 140/ WITTMANN Group Mold teMperature Controllers - WITTMANN Group

On page 23 of the official , you will find a small warning: "After operating above 300°C, allow the unit to cool to 150°C before switching off the circulating pump." Failure to do this cooks the thermal oil into carbon sludge on the heater cartridge. Follow this rule, and your "Exclusive" unit will outlast three injection molding machines. wittmann tempro plus d 360 manual exclusive

Main pump is running in reverse due to improper phase wiring. Proportional or bypass valves are mechanically stuck.

Activating the cooling function ensures the heater is off while the pump continues to circulate water to lower the internal temperature 1.2.1 .

** Wittmann 4.0 Integration:** Built-in OPC UA interface capability allows seamless plug-and-produce integration into injection molding machines (IMMs) for centralized data logging and remote monitoring. 2. Unpacking, Installation, and Utilities Setup This foundational principle is evident across the entire

The is a high-performance temperature control unit (TCU) featuring a 5.7" color touch-screen for precise mold temperature regulation. While standard models cover ranges like 90°C (open systems) or up to 180°C (pressurized systems), the series is defined by its modular pump and cooling options. Core Interface & Operation

The Wittmann Tempro Plus D 360 Manual Exclusive represents the gold standard for compact, stand-alone temperature control units. While it lacks the automated bells and whistles of Wittmann’s "Basic" or "Advanced" lines, the "Manual Exclusive" offers something arguably more valuable for the rugged shop floor: simplicity, reliability, and precise manual control. It is an ideal solution for injection molders who need consistent process stability without the complexity of a fully integrated automation system.

A color-coded mold symbol changes color— green for within tolerance, red for too hot, and blue for too cold—allowing operators to gauge the thermal health of the process at a glance. 3. Maintenance and Safe Shutdown Procedures » Air purging (unlimited mold purge for 140/

Ensuring the system maintains the required pressure levels.

Listen to the magnetic drive pump. A high-pitched whining or clicking indicates cavitation or particulate accumulation. Monthly Maintenance Checklist

To ensure you have the exact electrical schematics and spare parts lists tailored to your specific serial number, always cross-reference this guide with the physical document folder delivered alongside your machine.

The delivers a heating capacity of 9 kW (with an optional 18 kW upgrade) and a powerful 1.1 kW pump motor, generating a maximum flow rate of 70 L/min. Whether working with water or oil, the unit operates efficiently across a temperature range of 60°C to 140°C (water) and up to 160°C (oil).

Press the Heat On button. The controller will step-heat the system up to your entered setpoint. Troubleshooting Common Alarm Codes