Attach the Black (-) clamp to a heavy, unpainted metal part of the engine block or frame, far away from the battery.
Determine your battery voltage (6V or 12V) by reading the label on the battery. Step 2: Connecting the Clamps
2 Amps to 10 Amps (for slow, stable maintenance charging) Voltage Compatibility: 6V and 12V systems
Provides real-time feedback on battery capacity, charging status, and fault alerts.
: These required constant supervision to prevent "cooking" a battery, as they would pump current indefinitely until disconnected . everstart battery charger 60108m manual
Ensure the wall outlet has power by plugging in another appliance.
Always connect clamps first, then plug in. Always select the correct voltage and amperage for your battery. Respect the safety warnings about explosive gasses. If you follow these core rules, this charger will reliably serve you for many years.
Always connect the clamps to the battery before plugging the charger into the AC wall outlet.
Here is the exact sequence from the Everstart 60108m manual for the most common use case: charging a standard 12V car battery . Attach the Black (-) clamp to a heavy,
Connect the clamp to the positive battery post.
Ensure your battery is in a well-ventilated area. Clean the battery terminals of any corrosion using a wire brush to ensure a strong connection. Connect the Clamps:
If the engine does not start, wait for the charger to cool down before trying again. Failing to wait can melt internal components or trip your household circuit breaker. 🔍 Troubleshooting Common Issues
For safety, the unit will not operate and will typically trigger a fault indicator if the clamps are connected to the wrong terminals. Troubleshooting Common Issues Battery Not Detected: : These required constant supervision to prevent "cooking"
The is a popular, budget-friendly automatic battery charger commonly sold at Walmart. Designed for the DIY mechanic and casual user, this unit is typically a 6/12 Volt, 10 Amp manual or automatic charger (Note: The "M" suffix often indicates a manual unit, meaning it does not automatically shut off unless specified on the packaging; always verify your specific unit's faceplate).
The Charger Gets Extremely Hot or Makes a Loud Humming Noise
The battery is discharged and drawing maximum current.
