Uses a CMOS chip for precise scheduling with a minimum interval of 1 second , ideal for short-duration tasks.
The Sinotimer TM630S offers a range of advanced features that make it an ideal choice for various applications. Some of the key features include:
Common issues with the SINOTIMER TM630S include:
Before setting up your automated schedules, you must configure the current time and unlock the interface. 1. Unlocking the Screen sinotimer tm630s manual
The device is locked in standard "ON" or "OFF" mode instead of "AUTO".
Connect your "Hot" and "Neutral" wires to the Input terminals (usually marked 1 and 2).
Press to select the exact same days chosen for the "ON" cycle. Uses a CMOS chip for precise scheduling with
until the lock symbol (usually a small "a" or similar icon) disappears from the screen. 2. Set the Current Time and Date button and simultaneously press: to set the day of the week. to set the current hour. to set the current minute. to set the current second. 3. Set ON/OFF Programs
Press to select the same day block you chose for the ON cycle. Press H+ to set the hour you want the device to turn OFF. Press M+ to set the minute you want the device to turn OFF. Step 3: Save and Exit
The manual describes three override states: Press to select the exact same days chosen
0;bb7;0;97f; , start by pressing the button four times to unlock the panel. This model supports up to 28 ON/OFF programs per day with timing intervals as short as one second. 0;16;
Mistakes happen. If the device is behaving erratically, the recommends two types of reset.
⚠️ When switching to AUTO , ensure the current state matches your program. If the timer should be running at the current hour, press Manual to cycle to ON , then transition it directly to AUTO . Troubleshooting Common Issues