Erickhill Rt-100 User Manual -

The ErickHill RT-100 is a multi-functional device. Depending on your region and the production year, this model number has been used for:

| Terminal | Label | Function | |----------|-------|-----------| | 1 | L (IN) | Live input (100–240V AC) | | 2 | N (IN) | Neutral input | | 3 | NO | Normally open relay output (to load) | | 4 | COM | Common relay output | | 5 | N (OUT) | Neutral output (to load) | | 6 | S1 / S2 | External temperature sensor (optional) |

If you are testing high-radiation areas and find the continuous beeping disruptive, you can mute the sound. Press and hold the button for 2 seconds. The audio icon will disappear from the screen, leaving only the visual red backlight alarm active. Repeat the process to unmute. 5. Practical Testing Scenarios

A large, clear screen allows for easy reading in dark areas.

Long press the buzzer button to turn the audible warning alert on or off. Step 5: Power Off erickhill rt-100 user manual

The Data Hold feature is especially useful when you need to record a reading from a location where the display is difficult to view directly (e.g., behind an appliance).

The Erickhill RT-100 features built-in safety thresholds based on standard environmental health guidelines. The device automatically triggers a red visual alert and an audible beep when these thresholds are breached. Measurement Type Safe Range (Green Screen) Alarm Trigger (Red Screen) 0 to 39 V/m 40 V/m or higher Magnetic Field ( T) 0.40 T or higher Magnetic Field (mG) 0 to 3.9 mG 4.0 mG or higher 🛠️ Step-by-Step Operating Instructions Step 1: Powering the Device

The device features a clear, backlit LCD screen and a simple three-button interface. It utilizes two internal sensors to measure electric and magnetic fields simultaneously. Technical Specifications

This tester detects common wiring errors but cannot detect neutral-ground reversals, nor can it detect combined faults. 4. How to Use the Plug in the Tester: Insert the The ErickHill RT-100 is a multi-functional device

: Short press again to capture and lock the maximum value detected during your session. 3. UNIT / BEEP Button (Right)

The display turns red, flashes, and sounds a buzzer when the reading exceeds safe levels: 40 V/m or 0.4 μ T / 4 mG.

If readings are below the safety thresholds (40 V/m and 0.4 μT), the screen will display "Safe."

The device features an internal electromagnetic radiation sensor processed by a central microcontrol chip. It displays current radiation levels clearly on a backlit LCD screen. : 1 V/m to 1999 V/m The audio icon will disappear from the screen,

The ERICKHILL RT-100 is a consumer-grade EMF detector and should not be used as a substitute for professional medical or environmental testing equipment.

| Task | Frequency | Instructions | |------|-----------|--------------| | | As needed | Wipe the plastic housing and screen with a soft, dry cloth. Avoid liquids and solvents. | | Charging | When battery indicator is low | Use only the provided USB cable. Avoid overcharging overnight repeatedly, though the device has built-in protection. | | Storage | Long-term | Store in a cool, dry place. Charge to approximately 50% before extended storage periods. | | Firmware | As available | Check the official ERICKHILL website for any firmware updates (rare for this model). |

When the battery icon on the screen flashes empty, plug the device into a power source. Avoid utilizing the meter while it is plugged in and charging, as the power delivery cord will cause artificial spikes in the Electric Field reading. "Null" or Zero Readings Near Known Devices