Zpao Electric Bike Manual [hot]

Center the handlebars in the stem, ensuring the brake cables track smoothly without twisting.

Replacement parts can be obtained through online retailers, local bike shops, and XJD’s official website. For specific components like batteries and controllers, always verify compatibility with your model.

| Code | Function | Zpao Default Setting | Explanation | | :--- | :--- | :--- | :--- | | | Backlight Brightness | 03 (Max) | Reduce to 01 for daytime battery saving. | | P02 | Odometer Reset | 0 | Set to 1 to clear trip (do not touch P02 if you want permanent total miles). | | P03 | Voltage | 48V (most models) | Do not change unless you have a 52V or 36V rare model. | | P04 | Auto Sleep Timer (min) | 10 | Time before display shuts off idle. | | P05 | Pedal Assist Sensitivity | 3 (Medium) | 1 = slow response, 5 = instant torque. | | P06 | Wheel Diameter (inches) | 26 (fat tire) / 20 (folding) | Incorrect setting ruins speedometer accuracy. | | P07 | Speed Limit (km/h) | 25 (EU) / 32 (US) | In the US, you can increase to 40 km/h for off-road. Warning: Illegal for street use. | | P08 | Throttle Mode | 0 (Throttle works at any PAS level) | 1 (Throttle only works above PAS 1). | | P09 | Walk Mode Speed | 6 km/h | Do not exceed 6 km/h to avoid motor jerking. | | P10 | PAS Start-up Strength | 2 | Higher values cause "lurching" starts. | Zpao Electric Bike Manual

If your Zpao LCD screen displays an error code, it indicates an issue within the electrical loop. Here are common error codes found on Zpao and similar e-bike controller systems: Error Code Battery Under-Voltage

| Display Symbol | Meaning | |----------------|---------| | Battery bar / percentage | Remaining battery charge | | Current speed | MPH or km/h | | Odometer (ODO) | Total distance traveled | | Trip distance (TRIP) | Distance since last reset | | PAS level | 1–5 for pedal assistance | | Error code (if present) | Indicates a system fault | Center the handlebars in the stem, ensuring the

Email with your order number and a photo of the serial number (under the bottom bracket). Subject line: "REQUEST: Manual PDF for Model [Your Model]." They typically reply within 48 hours.

Unscrew the four bolts from the front stem faceplate using an Allen wrench. | Code | Function | Zpao Default Setting

Your LCD display uses error codes to communicate specific problems. Understanding these is key to a quick fix. While codes can vary between models, these are common ones you might see:

Check the sidewall of your tires for the recommended PSI (usually between 30–50 PSI for fat tire models, or higher for commuter models) and inflate accordingly. 2. Understanding Your Zpao E-Bike Display & Controls

Zpao e-bikes feature three distinct riding modes, controlled via the LCD display: